Photo Film > SP82

The Sprinter 82 colour printer brings new ideas and technology to the medium output colour printer. It is easy to operate and this results in consistently high quality and quantity output with minimum operator fatigue. Many of the Sprinter’s features are normally found only on more costly and complicated machines.

The Sprinter 82 features several operational modes and is equally suited to the Minilab, the photo studio, the Prolab, or as a reprint, roll film or enlarging printer for the large photofinisher. Negative handling is excellent: the films are advanced without moving the negative carrier. The slope unit gives a very high first time print yield.

High output
Daylight operation
Optional slope unit
Low operator fatigue
High speed film handling
High intensity video lamp
Multi paper/film channels
Push button density correction
Continuously adjustable magnification

The printer will handle negatives from 110 to 6 cm x 9 cm and produces prints up to 8” x 10” (20 cm x 20 cm). Each cropping size is initially set with a focussing screen and reflex mirror. Subsequently, the motor driven paper plane and manually adjusted lens deck can be reset using the digital position indicators.

The controls are ergonomically designed. Push button density and exposure controls, four balance channels, repeat unit and exposure timer are standard.

An optional slope correction unit, with built-in timer and automatic mean exposure time calculator, corrects for under and over exposed negatives to optimise first time print output.

Controls

Manual density control	Push buttons: ±1 stop in 1/6 stop increments. They also act as exposure buttons
Manual colour correction	Yellow, Magenta, Cyan rotary control
Size corrector / magnification corrector	23 position rotary switch
Channel selector	4 position rotary switch for 4 paper/film balance channels
Printing mode selector	4 position rotary switch Tricolour additive sequential with integrated measurement Tricolour additive with preset exposure (fixed filtration) Black & White: single white light exposure with auto measurement Black & White: single white light preset exposure
Operating mode selector	3 position rotary switch: Set-up: shutter remains close, paper transport off Print: normal print operation Focus: shutter opens, printing lamp on, paper transport off
Batch (repeat) counter	Select 0-99 prints by thumbwheel switch. Auto reset at zero with LED indicator showing number to be made
Batch mode	On/off switch
Exposure time selector	4 position rotary selector switches Y,M,C channels to 0-99.99 seconds timer or to external 3 channel timer
Paper advance	Rotary switch selects paper advance 1" (test) - 2.5 cm 2" (test) - 5 cm 2½" – 6.3 cm 3" - 7.6 cm 3½" - 9 cm 4" – 11.4 cm 4½" - 11.4 cm 5" – 13 cm 5¼" – 13.3 cm 6" – 15 cm 7" – 18 cm 8" – 20 cm 9½" 24 cm 10" – 25 cm

Specifications

Negative sizes	110, 126, 135, 127, 120 Max 6 cm x 9 cm
Paper widths	3" – 7.6 cm 3½" – 9 cm 4" – 10 cm 5" – 13 cm 7" – 18 cm 8" – 20 cm
Output	Up to 1200 3½" x 5" prints per hour Up to 400 8" x 10" prints per hour
Lenses	30 mm to 105 mm
Dimensions	Width 36" – 90 cm Depth 24" – 60 cm Height 72" – 183 cm
Power supply	110 V-125 V or 200 V – 250 V, 50 Hz or 60 Hz
Power consumption	400 W
Printing lamp	24 V 250 W